There are five styles and many sizes to fit the needs of most sign shops.
Click on the pictures to see a video for that tool.
Click on the pictures to see a video for that tool.
The Laminator Tool comes in sizes 26", 32", 38", 44", 50", 56" & 64". It is primarily used for working with prints. It will mount cut vinyl but is not well suited for the application of masking.
The laminator tool has a roll holder for holding rolled up materials to make them easier to handle. This tool is used
for graphics that are otherwise too long to handle unless they are rolled up.
The laminator can be identified by the white application edge. The edge has padding with a durable cotton cloth covering. The cotton cloth can be cleaned with a damp cloth or replaced if it gets cut or worn out. The padding helps to fill the groves in corrugated plastic and porous materials.
The Cut Vinyl Tool looks very much like the laminator tool. It can be identified by the black felt covering on both edges. The cut vinyl tool is so named because its primary purpose is working with cut vinyl. It will apply transfer tape both by pushing the roll ahead of the tool or by placing the roll in the roll holder and applied off the back of the tool.
This tool is the "jack of all trades" tool because it does it all.
It comes in 26" and 32" lengths.
The roll holder allows for long graphics to be rolled up and dispensed as the vinyl is applied.
The Rivet/Dent Tools and Yard Sign Tools are very similar to each other. The only difference is that the Rivet/Dent tools have a padded edge with felt for going over obstacles. The Yard Sign Tools have a cotton covered edge for laminating.
These tools are for use on small signs that don't require that the graphic be rolled up to make them easy to handle. Their light weight and slim design make it easy to work with on small signs and vertical surfaces. The Rivet/Dent Tools come in sizes 10", 18", & 26". The Yard Sign Tools come in sizes 10", 14", 20", 26".
The slim felt edge on both tools will apply masking and vinyl.
The Cradle tool is our latest addition to the Big Squeegee line of tools. It is light in weight and is pushed without the need to pick it up. It does very well with masking. It is made in all the sizes of the other tools. The felt edge can be substituted with a cotton edge to make this tool great for applying graphics to windows.
Yard Sign Tool
Cradle Tool
for Windows
for Windows
Call Today!
(580)585-2440
(580)585-2440
This tool is a must for sign shops. I have cut my labor time almost in half. Not to mention not needing to tape my prints before applying.
Totally Satisfied.
Stuart Fontenot
Totally Satisfied.
Stuart Fontenot
Rivet/Dent Tool
Cradle Tool
Cut Vinyl Tool
Laminator Tool
 |
All of our tools will laminate and mount pressure sensitive vinyl. The different sizes and types of tools make it possible to choose the right tool for the job. Each shop will benefit by having a variety of tools to work with.
The Big Squeegee line of tools is not intended to replace powered laminators. They are a good addition to any shop, even with a powered laminator. They make it easier to laminate small graphics and can reduce waste, by not having to change the roll in the power laminator to do an odd job.
All Big Squeegee tools will produce bubble and wrinkle free applications on pressure sensitive vinyl with a minimum amount of experience. Prints do not need to be pre-masked before application. Wet application is not necessary and highly discouraged.
The fabrics on all the tools are easy to replace when they get soiled, cut or worn out. Many of our original tools are still in use after 4 years of production. Some of them even have the original covering, even though they get used daily.
The Big Squeegee line of tools is not intended to replace powered laminators. They are a good addition to any shop, even with a powered laminator. They make it easier to laminate small graphics and can reduce waste, by not having to change the roll in the power laminator to do an odd job.
All Big Squeegee tools will produce bubble and wrinkle free applications on pressure sensitive vinyl with a minimum amount of experience. Prints do not need to be pre-masked before application. Wet application is not necessary and highly discouraged.
The fabrics on all the tools are easy to replace when they get soiled, cut or worn out. Many of our original tools are still in use after 4 years of production. Some of them even have the original covering, even though they get used daily.
Lamination laminator